ITEM |
STANDARD | RESULT |
Hardness |
ASTM D1037-6a (Janka Ball) | 2816 lbf (12.52kN) |
Dimensional Stability (Dimensional change coefficient) |
ASTM D1037 (20-90% RH) | Parallel/Perpendicular/Thickness swell 0.18/0.49/0.6/% |
Smoke Density |
ASTM E662 Maximum in flaming mode/ non-flaming mode |
237207 |
Abrasion Resistance* |
ASTM D4060-07 | Weight loss (500 cycles) 8mg; Wear Index 15mg per 1000 cycles |
Scratch Resistance* |
ASTM D5582-00 | 5H |
Slip Resistance* |
ASTM D2394-05 | Static coefficient of friction/Sliding Coefficient of friction 0.56/ 0.39 |
Stain Resistance* |
ASTM D3023-98 (reap. 2003) | No graying, spotting, wrinkling, discolouration after washing |
Formaldehyde Emissions |
ASTM D6007-02, UV Vis | 0.01ppm (Compliant with P2 requirement acc. Section 93120.2 Title 17, California Code of Regulation- CARB) |
ITEM |
STANDARD | RESULT |
Hardness |
Brinell Ihd-Werknorm 202 | 84-0 N/mm2 |
Density |
EN 323:1993 | 1.14g/cm3 |
Dimensional Stability |
EN 434:1994 (20-80% RH) | Parallel/ Perpendicular 0.12/0.21% |
Flammability Resistance |
EN 13501-1:2007 | Class Cf1-s1 |
Abrasion Resistance** |
SS-EN 14354 (12/16) | 1600-1800 revs (WRO) |
Scratch Resistance** |
Hamberger- Hobel | 21N |
Adhesion** |
SS-EN14354 | GT 0/5B |
Impact test** |
EN 423:2001 | SS-EN 14354 |
Slip Resistance** |
BGR 151/ DIN 51 130 | R10 |
Formaldehyde Emissions |
EN 717-2:1995 | 0.5mg/m2h (E1) |
ITEM |
STANDARD | RESULT |
Hardness |
CSIRO DBR Technical Paper (second series) No. 31-1979 |
14,837kN |
Density |
CSIRO DBR Technical Paper (second series) No. 31-1979 |
1,011.5kg/m3 |
Flammability (ISO 9239.1-2003) |
Mean distance of flame travel/Avg. critical radiant flux/ Avg. smoke obscuration |
300mm/7.1kW/m2/31% min |
